You have arrived on the Request for Quote (RFQ) page for part number 5H284, a Caterpillar Inc component that is listed with the product description “Worm Shaft” and NSN 3040-00-712-7699 for fast identification. By using the form supplied below, you can offer details regarding your requirements to secure customized procurement solutions for your consideration. As our goal is to provide quick service, you can expect a response within 15 minutes of our staff members reviewing your submission. Alternatively, if you use the email or phone number at the bottom of the webpage, you can directly connect with our experts to discuss your needs.
Note : We Will Not Share Your Information To Any Third Parties.
Alongside Caterpillar Inc part number 5H284, you can seamlessly search for more items from this manufacturer or CAGECode 11083 using our curated catalogs. Similarly, we also offer means for locating other products that belong to FSC 3040 Miscellaneous Power Transmission Equipment, which this component falls under having the NSN 3040-00-712-7699. Whether you desire part number 5H284 or other NSN components, you can rest assured that our entire inventory is sourced from reputable manufacturers and suppliers. Bearing this in mind, kick off procurement today to see why so many customers select Aero Defence Solutions as their trusted purchasing hub.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-712-7699 Item PartTypeName: WORM SHAFT | 3040 | 007127699 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5H284 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | 0.625 INCHES NOMINAL SECOND END,FOURTH PORTION |
| ABHP | OVERALL LENGTH | 12.250 INCHES NOMINAL |
| ABND | TAPER LENGTH | 1.469 INCHES NOMINAL SECOND END,THIRD PORTION |
| ABNJ | TAPER PER FOOT IN INCHES | 1.500 SECOND END,SECOND PORTION |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END,FOURTH PORTION |
| BYFR | TEETH HARDNESS RATING | 55.0 ROCKWELL C MINIMUM |
| CFFB | WORM THREAD QUANTITY | 4 |
| CFFC | WORM THREAD LEAD | 2.846 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFG | WORM HELIX ANGLE | 28 DEG |
| CFFK | WORM OUTSIDE DIAMETER | 2.250 INCHES NOMINAL |
| CFFL | WORM PITCH DIAMETER | 0.688 INCHES NOMINAL |
| CFFN | WORM THREAD SECTION LENGTH | 2.750 INCHES NOMINAL |
| CFFP | WORM BODY LENGTH | 4.312 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.876 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.906 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.250 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.998 INCHES MINIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.000 INCHES MAXIMUM SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1265 INCHES MINIMUM FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1265 INCHES MINIMUM SECOND END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1270 INCHES MAXIMUM FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1270 INCHES MAXIMUM SECOND END,FIRST PORTION |
| CFGD | TAPER LARGEST DIAMETER | 1.188 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFGG | TAPERED SECTION KEYWAY WIDTH | 0.2487 INCHES MINIMUM SECOND END,SECOND PORTION |
| CFGG | TAPERED SECTION KEYWAY WIDTH | 0.2505 INCHES MAXIMUM SECOND END,SECOND PORTION |
| CFGH | TAPERED SECTION KEYWAY DEPTH | 0.307 INCHES MINIMUM SECOND END,SECOND PORTION |
| CFGH | TAPERED SECTION KEYWAY DEPTH | 0.313 INCHES MAXIMUM SECOND END,SECOND PORTION |
| CFGJ | INVOLUTE SPLINE QUANTITY | 11 FIRST END,SECOND PORTION |
| CFGK | INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 30.0 FIRST END,SECOND PORTION |
| CFGL | INVOLUTE SPLINE PITCH DIAMETER | 0.6875 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFGM | INVOLUTE SPLINE LENGTH | 1.031 INCHES NOMINAL FIRST END,SECOND PORTION |
| MATT | MATERIAL | STEEL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
