You have arrived on the Request for Quote (RFQ) page for part number SS5116-10-52, a Sps Technologies Inc component that is listed with the product description “Bolt Close Tolerance” and NSN 5306-01-274-0036 for fast identification. By using the form supplied below, you can offer details regarding your requirements to secure customized procurement solutions for your consideration. As our goal is to provide quick service, you can expect a response within 15 minutes of our staff members reviewing your submission. Alternatively, if you use the email or phone number at the bottom of the webpage, you can directly connect with our experts to discuss your needs.
Note : We Will Not Share Your Information To Any Third Parties.
Alongside Sps Technologies Inc part number SS5116-10-52, you can seamlessly search for more items from this manufacturer or CAGECode 80539 using our curated catalogs. Similarly, we also offer means for locating other products that belong to FSC 5306 Bolts, which this component falls under having the NSN 5306-01-274-0036. Whether you desire part number SS5116-10-52 or other NSN components, you can rest assured that our entire inventory is sourced from reputable manufacturers and suppliers. Bearing this in mind, kick off procurement today to see why so many customers select Aero Defence Solutions as their trusted purchasing hub.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-274-0036 Item PartTypeName: BOLT,CLOSE TOLERANCE | 5306 | 012740036 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SS5116-10-52 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| ANEE | GRIP LENGTH | 3.240 INCHES MINIMUM AND 3.260 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | 54800 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.968 INCHES MINIMUM FIRST HOLE AND 4.018 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | ASUPPLY WITH DOG TYPE POINT 0.499 IN. MIN AND 0.552 IN. MAX. DIAMETER; 0.537 IN. NOMIANL LENGTH WITH GROOVE PIN MADE OF 300 DERISED CRES PER FED-STD-66; APPLY DRY FILM LUBRICANT TO PAWL/RETAINER |
| MATT | MATERIAL | STEEL COMP 302B SPRING OR STEEL COMP 304 SPRING OR STEEL COMP 631 SPRING |
| MATT | MATERIAL | STEEL COMP 303 POINT OR STEEL COMP 303MA POINT OR STEEL COMP 303PB POINT OR STEEL COMP 303 PLUS X POINT OR STEEL COMP 303SE POINT |
| MATT | MATERIAL | STEEL COMP XM-13 FASTENER |
| MATT | MATERIAL | STEEL COMP XM-13 STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A580 ASSN STD 1ST MATERIAL RESPONSE SPRING OR ASTM A580 ASSN STD 2ND MATERIAL RESPONSE SPRING OR AMS5678 ASSN STD 3RD MATERIAL RESPONSE SPRING |
| SFTT | SURFACE TREATMENT | PASSIVATE FASTENER |
| SFTT | SURFACE TREATMENT | PASSIVATE SPRING |
| SFTT | SURFACE TREATMENT | PASSIVATE STAND-OFF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.476 INCHES MINIMUM AND 1.526 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 4.736 INCHES MINIMUM AND 4.766 INCHES MAXIMUM |
| AASK | HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER |
| AASU | HEAD HEIGHT | 0.608 INCHES MINIMUM AND 0.628 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.672 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 1.040 INCHES MINIMUM AND 1.050 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
